Questions? Call 1-613-822-0089

We offer a full line of products that create a Ceramic coating in the internals of any vehicle/equipment that has metal surfaces subjected to constant friction. Scroll down to see the entire line of products or click below to choose a product.

See RVS Master™ Nano-Ceramic Treatment Products For:

RVS Master™ Gasoline Engine Treatment produces and integrates a new Nano-Ceramic surface layer onto all metal parts that are under friction inside your engine. Cylinder walls are thus restored, crankshaft bearings are protected from wear, and so are all other moving parts in contact - camshafts, rocker arms, and valves.

The new Ceramic surface has superior properties - it has a friction coefficient many times lower than that of Iron. As a result friction inside your engine is reduced, fuel economy is improved (5-10% on avg.) and emissions drop significantly. Ultimately, your engine's life is extended because there is now less wear and heat - its worst enemies.

The benefits of RVS Master™ treatment don't stop there: compression and oil pressure are restored to near factory-spec, thus increasing power. The engine becomes quieter and runs with fewer vibrations. In many cases, lifter-tick is reduced or completely disappears.

It is not necessary to treat your engine at every oil change. A single treatment is enough for every 60,000km / 40,000 miles of driving.

Used in:

> 2 cyl engines

> 3 cyl engines

Applications:

> All 4-stroke Motorcycles

> ATV's, Snowmobiles

> Other small 4-stroke engines

Used in:

> 3 cyl engines

> 4 cyl engines

Applications:

> Most Small Cars

> Small Boats

> Power equipment

Used in:

> Inline 5 engines

> V6 engines

Applications:

> Mid-size Cars & Pickups

> Small & Mid-Size SUV's

> All Minivans

Used in:

> V-8 engines

> V-10 engines

> V-12 engines

Applications:

> Large Cars

> Large SUV's & Pickups

> Some RV's

Modern diesel engines are subjected to immense internal pressures and wear, and 20-25% of the power produced is wasted to internal friction. We have addressed this issue by specifically formulating our RVS Master™ Diesel Engine Treatment using a more concentrated formula. A new Nano-Ceramic surface layer is created on all metal parts under friction inside your engine. This Ceramic layer has superior physical properties: a low friction coefficient and higher thermal resistance.

As a result friction inside your engine is reduced, fuel economy is improved (5-10% on avg.) and there is a profound drop in emissions. Cylinder walls are restored, crankshaft bearings are protected from wear, and so are all other moving parts in contact - camshafts, rocker arms, and valves. Compression and oil pressure are restored to near factory-spec, thus increasing power and efficiency. The engine becomes quieter, runs with fewer vibrations, and its life is significantly extended.

RVS Master™ Diesel Engine Treatment is ideal for use in commercial fleets since it provides significant savings in fuel that are much greater than the cost of our product.

It is not necessary to treat your engine at every oil change. A single treatment is enough for every 60,000km / 40,000miles or ~1500hrs of operating time.

Used in:

> 2 cyl engines

> 3 cyl engines

> 4 cyl engines

Applications:

> Small & mid-sized cars

> Power generators

> Small power equipment

Used in:

> 5 cyl, V6 engines

> V6, V8 & V10 engines

Applications:

> Mid-size pickups

> Small & mid-size SUV's

> Small farm equipment

Used in:

> Large I-6, V8 & V10 Diesel Engines

Applications:

> Large SUV's & Pickups

> Some RV's

> Mid-Size Farm Equipment

Used in:

> Semi's I-6 engines

> Other Large Diesel's

Applications:

> Semi's & Large RV's

> Large Pwr Generators

> Large Tractors & other Farm Equipment

RVS Master™ 2-stroke Engine Treatment is specifically formulated for use in engines where the motor oil is pre-mixed with the fuel. It creates an integrated new Nano-Ceramic layer onto all metal parts that are under friction inside your engine. Cylinder walls are thus restored and compression levels return to factory-spec.

The new Ceramic layer which now coats the cylinder walls and other moving parts has superior properties - it has a friction coefficient many times lower than that of Iron, and higher thermal resistance. As a result there is less wear and internal heat produced, aiding in keeping the engine cool and running optimally. Fuel economy is also increased (5-10% avg.) and because of the lower internal friction, emissions are reduced.

This product is ideal for use in any 2-stroke engine, from Motorcycles & Scooters to lawn care equipment. For Chainsaws, please see our special RVS Master™ Chainsaw Treatment.

In most cases, a single treatment is enough to last the lifespan of the equipment being treated.

Used in:

> 2-stroke engines up to 50cc

Applications:

> Small Scooters

> Weed-whackers

> Leaf Blowers

Used in:

> 2-stroke engines up to 250cc

Applications:

> Large Scooters

> Small to Medium sized Motorcycles

Used in:

> 2-stroke engines up to 500cc

Applications:

> Large Bikes & Other Machines

Turbochargers and Superchargers are subject to immense heat and pressures; turbines can spin at over 100,000 rpm's, making these devices especially vulnerable to wear and damage due to extreme heat and friction.

Virtually all Turbo/Superchargers are cooled by the engine's oil; therefore, when you treat your engine with RVS, the Turbo/Supercharger is also treated, since the RVS Nano-Ceramic particles are transferred to all friction areas that are lubricated by the engine's oil. The high heat inside these devices ensures an optimal environment in which the RVS particles can react with all metal friction surfaces.

As a result, ball and sleeve bearings are coated with a Ceramic layer which has a very low friction coefficient, thus dramatically lowering the heat and friction inside the Turbo/Supercharger. The device is now stronger, can better withstand temporary oil starvation & heat abuse, and its life is significantly extended.

Turbo/Superchargers are automatically treated when you apply the appropriate RVS Master Engine Treatment. Depending if you have a gasoline or diesel engine, click on the box below to be taken to the proper order page:

Used in:

> All Gasoline Turbocharged Engines

Applications:

> All Cars, Minivans, Pickup Trucks, SUV's

> RV's, Buses

Used in:

> All Diesel Turbocharged Engines

Applications:

> All Cars, Minivans, Pickup Trucks, SUV's

> RV's, Semi's, Buses

RVS Master™ Transmission & Differential Treatment produces a new metal ceramic surface structure on gear teeth, bearings and other moving metal parts under constant friction. As a result the geometries of gear teeth and bearing surfaces are restored and shifting becomes smoother; vibration and noise levels are also reduced. In automatic transmissions, the oil pump's efficiency is boosted and oil pressure is restored to near factory spec.

The RVS Master™ treatment increases the life of your transmission or differential and is especially useful in cases where the vehicle is used for towing and is being subjected to high loads. Our product has also proven quite successful in reducing grinding noises from old and worn differentials of RWD & AWD vehicles.

It is not necessary to treat your transmission at every oil flush. Only one treatment is needed for every 60,000km / 40,000miles of driving.

Used in:

> Differentials

> Manual & Auto Trans.

Applications:

> Auto Trans of small cars

> Manual Trans of all cars

> Differentials of all RWD & AWD vehicles

Used in:

> Automatic Trans.

Applications:

> Mid-size & Large Cars, Minivans, SUV's & Pickups

Used in:

> Automatic Trans.

Applications:

> Large Cars, Pickups & SUV's

> Some RV's & Semi's

RVS Master™ Power Steering & Hydraulics Treatment wear-proofs your Power Steering / Hydraulic system by forming and integrating a Nano-Ceramic layer into moving metal components which are subjected to constant heat and friction. As a result the useful life of power steering and other hydraulic pumps is increased, and you will notice smoother and quieter operation of your equipment.

In some vehicles equipped with full power steeringa failure of the pump could be disastrous; with RVS you can have more peace of mind, as treated components are more durable and can withstand more abuse from heat and friction. 

For Power Steering Systems, only one treatment is necessary for every 60,000km / 40,000 miles of driving.

For Hydraulic systems, one treatment lasts ~1500hrs of operating time.

Used in:

> All Power Steering Systems

Applications:

> All Cars, Minivans, Pickup Trucks & SUV's

> RV's, Buses, Semi's

Used in:

> All Hydraulic Systems

Applications:

> Excavators, Skidsteers, all Power machinery

> Hydraulics of Semi's, RV's & Buses




RVS Master™ Motor Flush is a revolutionary new product that flushes and cleans internal combustion engines during normal driving. The special formula includes RVS nano-ceramic particles which perform a deep cleansing of your engine's metal moving parts, and maintain the surfaces of cylinder walls, crankshaft bearings, camshafts and valves intact.

RVS Master™ Motor Flush works great when used between RVS engine treatments in order to keep your engine clean and running optimally. It is also advisable to use our Motor Flush before applying RVS Master™ Engine Treatments in cases when you have applied other additives to your motor oil - these additives usually contain Teflon and Molybdenum particles which can interfere with the RVS reaction.

Our Motor Flush does not contain any chemical solvents and does not damage gaskets and seals.

Used in:

> 2, 3, 4 & 5cyl engines

> V-6 engines

Applications:

> Small & Mid-sized Cars, Van's, Pickups & SUV's

> All 4-stroke Motorcycles

> ATV's, Snowmobiles

Used in:

> V8, V10 & V12 engines

Applications:

> Large Cars, Pickup Trucks, SUV's

> Large Power Equipment




RVS Master™ Injector Cleaner is specifically formulated for the treatment of fuel pumps & injectors of Gasoline engines. It is added directly to the fuel tank and treats your fuel delivery system as you drive. 

In addition to cleaning out your dirty injectors from gunk build-up and improving atomization of the fuel mixture, RVS also creates a durable nano-ceramic layer on all metal moving parts that are under friction. The result is an extended life of your Fuel Pump and Injectors.

To ensure optimal operation of your fuel delivery system, treat it with RVS Master™ Injector Cleaner once every 40,000km / 25,000 miles.

Note: this product is intended for use in Gasoline Engines only. For Diesel engines, use our RVS Master™ Diesel Injection Pump Treatment below.

Used in:

> All Gasoline engines

Applications:

> Cars, Pickup Trucks, Vans & SUV's

> Motorcycles, Scooters

> ATV's, Snowmobiles





RVS Master™ Diesel Injection Pump Treatment is specifically formulated for restoring and protecting the Fuel Pump in Diesel Engines. It is added directly to the fuel tank and treats your Injection Pump as you drive. 

Our product creates a durable Nano-Ceramic layer on all metal moving parts that are under friction. The result is an extended life of your Injection Pump.

To ensure optimal operation of your fuel delivery system, treat it with RVS Master™ Diesel Injection Pump Treatment once every 40,000km / 25,000 miles.

Note: this product is intended for use in Diesel Engines only. For Gasoline engines, use our RVS Master™ Injector Cleaner above.

Used in:

> All Diesel Engines

Applications:

> Cars, Pickup Trucks & SUV's

> Power Machines & Equipment



RVS Master™ Gun Treatment is a revolutionary new product that will significantly improve the accuracy, durability and longevity of your firearm. The high amounts of heat and friction generated when firearms are fired create ideal conditions for RVS to work, making especially effective.

RVS Master™ will form a new “slippery” nano-ceramic surface inside your weapon’s barrel, significantly reducing friction and heat. The result: increased range, improved accuracy, extended rapid-fire capability, less heat. Corrosion is also reduced – ceramic doesn’t rust! In addition, when RVS Master™ Gun Treatment is applied to the receiver, it will coat all metal parts inside, making the gun's overall mechanism smoother and less likely to jam.

One RVS Master™ Gun Treatment is enough to treat between 2-4 handguns, depending on how worn they may be, or two rifle barrels. One treatment will typically last around 1000 shots. Follow with another RVS treatment in order to extend your firearm's life.

Note: One package is sufficient to treat four Pistols, two Rifles or one double-barrel Shotgun

Used in:

> All Firearms

Applications:

> Pistols, Revolvers

> Shotguns & Rifles

> Semi & Full-Auto Weapons






Our Engineers have designed this product specifically for the treatment of 2-stroke Chainsaws. This "2 in 1" product is used for both the treatment of Chainsaw Engines up to 65cc's in size and for restoration of the chain's teeth and links.

The RVS treatment creates a durable Nano-Ceramic layer on the surface of all metal parts that are under friction inside the chainsaw's engine. Cylinder walls are restored and compression levels return to factory-spec. As a result, the chainsaw runs smoother, starts easier and lasts much longer. When applied to the chain, the ceramic layer makes it stronger, doubles its service life, reduces sagging, and increases the efficiency and speed of the chainsaw.

A single RVS Master™ Chainsaw Treatment is enough to treat one chainsaw engine + chain, or two chains. 

Used in:

> 2-stroke Chainsaws up to 65cc

Applications:

> Chainsaw engine

> Chainsaw chain






RVS Master™ Bearing & Chain Grease is our general all-purpose product that can be applied to motorcycle chains, wheel bearings, and anyplace where there is metal-to-metal friction. The possibilities for use are limitless.

When treated with RVS Master™ Bearing & Chain Grease, your equipment will become stronger and more durable, will wear out slower, and will be more efficient because the newly formed nano-ceramic layer reduces the friction and heat generated. All of this will help keep your device in service longer and with fewer breakdowns.

Used in:

> All equipment with metal parts under friction

Applications:

> Bike chains

> Wheel bearings

> Any metal-to-metal friction parts